< Previous | Contents | Next >
Introduction to the Classification Technical Rules 2015 13
CONTENTS OF CLASSIFICATION TECHNICAL RULES
Section | 1 | General |
Section | 2 | Harmonized Notations and Corresponding Design Loading Conditions |
Section | 3 | Double Bottoms |
Section | 4 | Hopper Tanks |
Section | 5 | Topside Tanks |
Section | 6 | Transverse Bulkheads and Stools |
Section | 7 | Hold Frames |
Section | 8 | Decks and Shell Platings |
Section | 9 | Hatch Covers and Hatch Coamings of Cargo Holds |
Section | 10 | Longitudinal Strength of Hull Girder in Flooded Condition for Bulk Carriers |
Section | 11 | Evaluation of Allowable Hold Loading for Bulk Carriers Considering Hold Flooding |
Section | 12 | Evaluation of Scantlings of Corrugated Transverse Watertight Bulkheads in Bulk Carriers |
Considering Hold Flooding | ||
Section | 13 | Requirements for the Fitting of a Forecastle for Bulk Carriers, Ore Carriers and |
Combination Carriers | ||
Section | 14 | Water Level Detection & Alarm and Drainage & Pumping Systems for Bulk Carriers and |
Single Hold Cargo Ships | ||
Section | 15 | Supplementary Provisions for Carriage of Liquid in Holds |
Section | 16 | Electrical Equipment of Coal Carriers |
Section | 17 | Renewal Criteria for Side Shell Frames and Brackets in Single Side Skin Bulk Carriers and Single Side Skin OBO Carriers |
Section | 18 | Cargo Hatch Cover Securing Arrangements |
CHAPTER | 4 | CONTAINER SHIPS |
Section | 1 | General |
Section | 2 | Longitudinal Strength |
Section | 3 | Double Bottoms |
Section | 4 | Double Side Construction |
Section | 5 | Transverse Bulkheads |
Section | 6 | Deck Construction |
Section | 7 | Freight Container Securing Arrangement |
Section | 8 | Welding |
CHAPTER | 5 | SHIPS CARRYING LIQUEFIED GASES IN BULK (Separate Publication) |
Section | 1 | General |
Section | 2 | Ship Survival Capability and Location of Cargo Tanks |
Section | 3 | Ship Arrangements |
Section | 4 | Cargo Containment |
Section | 5 | Process Pressure Vessels and Liquid, Vapour, and Pressure Piping Systems |
Section | 6 | Materials of Construction |
Section | 7 | Cargo Pressure/Temperature Control |
Section | 8 | Cargo Tank Vent Systems |
Section | 9 | Environmental Control |
Section | 10 | Electrical Installations |
Section | 11 | Fire Protection and Fire Extinction |
Section | 12 | Mechanical Ventilation in the Cargo Area |
Section | 13 | Instrumentation (Gauging, Gas Detection) |
Section | 14 | Personnel Protection |
Section | 15 | Filling Limits for Cargo Tanks |
Section | 16 | Use of Cargo as Fuel |
Section | 17 | Special Requirements |
Section | 18 | Operating Requirements |
Section | 19 | Summary of Minimum Requirements |
CHAPTER | 6 | SHIPS CARRYING DANGEROUS CHEMICALS IN BULK (Separate Publication) |
Section | 1 | General |
Section | 2 | Ship Survival Capability and Location of Cargo Tanks |
Section | 3 | Ship Arrangements |
14 Introduction to the Classification Technical Rules 2015
CONTENTS OF CLASSIFICATION TECHNICAL RULES
Section 4
Section 5
Section 6
Section 7
Section 8
Section 9
Section 10
Section 11
Section 12
Section 13
Section 14
Section 15
Section 16
Section 17
Section 18
Section 19
Section 20
Section 21
Cargo Containment Cargo Transfer
Materials of Construction Cargo Temperature Control
Cargo Tank Venting and Gas-freeing Arrangements Environmental Control
Electrical Installations
Fire Protection and Fire Extinction Mechanical Ventilation in the Cargo Area Instrumentation
Personnel Protection Special Requirements
Operational Requirements
Summary of Minimum Requirements
List of Chemicals to which this Chapter does not apply Index of Products Carried in Bulk
Transport of Liquid Chemical Wastes
Criteria for assigning carriage requirements for products subject to the IBC Code