< Previous | Contents | Next >
Stems
Stern Frames
Introduction to the Classification Technical Rules 2015 17
CONTENTS OF CLASSIFICATION TECHNICAL RULES
CHAPTER | 3 | LONGITUDINAL STRENGTH |
Section | 1 | General |
Section | 2 | Bending Strength |
Section | 3 | Buckling Strength |
CHAPTER | 4 | PLATE KEELS AND SHELL PLATINGS |
Section | 1 | General |
Section | 2 | Plate Keels |
Section | 3 | Shell Plating for Midship Part of Ship |
Section | 4 | Shell Plating for End Parts |
Section | 5 | Side Plating in way of Superstructure |
Section | 6 | Local Compensation of Shell Plating |
CHAPTER | 5 | DECKS |
Section | 1 | General |
Section | 2 | Effective Sectional Area of Strength Deck |
Section | 3 | Deck Plating |
CHAPTER | 6 | SINGLE BOTTOMS |
Section | 1 | General |
Section | 2 | Centre Keelsons |
Section | 3 | Side Keelsons |
Section | 4 | Floor Plates |
Section | 5 | Longitudinals |
Section | 6 | Strengthened Bottom Forward |
CHAPTER | 7 | DOUBLE BOTTOMS |
Section | 1 | General |
Section | 2 | Centre Girders |
Section | 3 | Side Girders |
Section | 4 | Solid Floors |
Section | 5 | Bottom Longitudinals |
Section | 6 | Inner Bottom Plating and Margin Plates |
Section | 7 | Hold Frame Brackets |
Section | 8 | Open Floors |
Section | 9 | Construction of Strengthened Bottom Forward |
CHAPTER | 8 | FRAMES |
Section | 1 | General |
Section | 2 | Frame Spacing |
Section | 3 | Transverse Hold Frames |
Section | 4 | Side Longitudinals |
Section | 5 | Tween Deck Frames |
Section | 6 | Frames in Both Peaks |
CHAPTER | 9 | CANTILEVER BEAM CONSTRUCTION |
Section | 1 | Cantilever Beams |
Section | 2 | Web Frames |
Section | 3 | Connection of Cantilever Beams to Web Frames |
CHAPTER | 10 | BEAMS |
Section | 1 | General |
Section | 2 | Deck Load |
Section | 3 | Longitudinal Beams |
Section | 4 | Transverse Beams |
Section | 5 | Beams on Bulkhead Recesses and Others |
18 Introduction to the Classification Technical Rules 2015
CONTENTS OF CLASSIFICATION TECHNICAL RULES
Section 6
Section 7
Section 8
Beams on the Top of Deep Tanks
Deck Beams Supporting Specially Heavy Loads Beams on Deck Carrying Unusual Cargoes
CHAPTER | 11 | DECK GIRDERS |
Section | 1 | General |
Section | 2 | Longitudinal Deck Girders |
Section | 3 | Transverse Deck Girders |
Section | 4 | Deck Girders in Tanks |
Section | 5 | Hatch Side Girders |
Section | 6 | Hatch End Girders |
CHAPTER | 12 | PILLARS |
Section | 1 | General |
Section | 2 | Scantling of Pillars |
CHAPTER | 13 | ARRANGEMENTS TO RESIST PANTING |
Section | 1 | General |
Section | 2 | Arrangements to resist Panting Forward the Collision Bulkhead |
Section | 3 | Arrangements to resist Panting Abaft Aft Peak Bulkhead |
CHAPTER | 14 | WATERTIGHT BULKHEADS |
Section | 1 | Arrangement |
Section | 2 | Construction |
Section | 3 | Watertight Doors |
CHAPTER | 15 | DEEP TANKS |
Section | 1 | General |
Section | 2 | Bulkheads of Deep Tanks |
Section | 3 | Fittings of Deep Tanks |
CHAPTER | 16 | SUPERSTRUCTURES AND DECKHOUSES |
Section | 1 | General |
Section | 2 | Construction |
Section | 3 | Access Openings in Superstructure End Bulkheads |
CHAPTER | 17 | MACHINERY SPACES AND ENGINE CASINGS |
Section | 1 | General |
Section | 2 | Main Engine Foundations |
Section | 3 | Construction of Boiler Rooms |
Section | 4 | Thrust Blocks and Foundations |
Section | 5 | Machinery Space Openings |
CHAPTER | 18 | TUNNELS AND TUNNEL RECESSES |
Section | 1 | General |
CHAPTER | 19 | HATCHWAYS AND OTHER DECK OPENINGS |
Section | 1 | General |
Section | 2 | Hatchways |
Section 3
Hatch Openings closed by Portable Covers and secured
Battening Devices
Weathertight by Tarpaulins and
Section 4
Section 5
Section 6
Hatchways Closed by Weathertight Covers Fitted with Gaskets and Clamping Devices Hatchway Covers for Sand Carrier and Dredger
Companion ways and Other Deck Openings