Iranian Classification Society Rules

< Previous | Contents | Next >

Section 1 General


101. General

The materials to be which the system is


used in piping systems are to be suitable for the medium and service for intended. Unless specifically mentioned in this chapter, all metallic materials

with melting points above 900may be used.


102. Materials for piping arrangement


1. Copper and copper alloy pipes, valves and pipe fittings

(1) Copper and copper alloy pipes, valves and pipe fittings are not to be used for piping arrange- ments having design temperatures above the limits below. However, special bronze, suitable for high temperature service under the approval of the Society, may be used for piping arrange-

ments having design temperatures up to 260.

(A) Copper and aluminium brass : 200

(B) Copper nickel : 300

(2) Pipes for starting air are not to be of copper or copper alloys when the outer diameter exceeds

44.5 mm .

2. Rigid plastic pipes may be used for Class III piping systems. However, service limitations and rele- vant data will be required by the Society. See Guidance


3. Aluminium pipes may be used for Class III piping systems. However, service limitations and rele- vant data will be specified by the Society. See Guidance